Enquire About The
SPS 1000 ADV R
UPS
Description
Salicru's SPS ADVANCE R series UPSs feature line-interactive technology (AVR stabilisation with buck-boost regulation) and pure sine-wave output to power all kinds of critical load.
This technology enables a high level of efficiency to be achieved, providing significant savings in the total consumption of the rack. Also noteworthy is their compatibility with current APFC (active power factor correction) power supplies.
In terms of communications, the options are through the RS-232 interface and management and monitoring software for Windows, Linux and Mac systems, or through the available adapters (SNMP/Web adapter) to be inserted into the smart slot that the devices incorporate.
The series is available in powers of 750, 1,000 and 1,500 VA, all in 19” rack format and with a height of 1U. The depth is 216 mm for the 750 VA model and 485 mm for the 1,000 and 1,500 VA models.
Technical Specifications
TECHNOLOGY - Line-interactive
FORMAT - Rack 1U
INPUT
Rated voltage - 230 V
Voltage range 100% load - 165 ÷ 290 V
Stabiliser - AVR (Buck & Boost)
Rated frequency - 50 / 60 Hz (auto-detection)
Frequency range - ±5 Hz
Auto~detection of frequency - Yes
Protection - Fuse
OUTPUT
Rated voltage - 230 V
Voltage accuracy (battery mode) - ±10%
Power (VA/W) - 1000 / 600
Total harmonic distortion (THDv) - <5% linear load / <10% non-linear load
Waveform (battery mode) - Pure sine wave
Frequency - 50/60 Hz (same as input)
Frequency accuracy (battery mode) - ±1 Hz
Compatibility with APFC loads - Yes (1)
Performance Stabiliser mode (AVR) - >92%
Performance Battery mode - >80%
Performance in mains mode - >95%
Admissible overloads in battery mode - 110% for 1 min / 130% immediate
Socket type - IEC C13
No. Of sockets - 4
BATTERY
Battery type - Pb-Ca sealed, AGM, maintenance-free
Charge type - I/U (constant current/constant voltage)
Recharge time - 4 hours to 90%
User replaceable battery - Yes
Battery test - Automatic on each start-up + manual
COMMUNICATION
Ports - RS-232 / DB9
Intelligent slot - Slot for SNMP/potential-free contacts/
MODBUS
Monitoring software - For Windows, Linux and Mac
INDICATIONS
Type - LCD + keypad
Values - Input and output voltage / % load / % battery / backup
Levels - Connected load / overload / battery / low battery
Operating modes - Normal / Stabilisation (AVR) / Battery / Fault
Alarm - Battery / low battery / overload / failure
Audible - Every 30 s for battery operation. Every 2 s for low battery / Polarity. Every 0,5 s for overcharge. Continuous for fault.
Failure - Display LCD
OTHER FUNCTIONS
Cold start (start-up from batteries) - Yes
Emergency stop (EPO) - Yes
GENERAL
Operating temperature - 0º C ÷ 40º C
Relative humidity - Up to 95%, non-condensing
Maxium operating altitude - 2,400 masl
Acoustic noise at 1 metre - <40 dB
STANDARDS
Safety - EN-IEC 62040-1
Electromagnetic compatibility (EMC) - EN 62040-2(C2)
Operation - EN 62040-3
Quality and environmental management - ISO 9001 & ISO 14001
DIMENSIONS
Depth (mm) - 485
Width (mm) - 433
Height (mm) - 44
WEIGHT
Weight (kg) - 14,2
(1) Power degradation of 20%
