Enquire About The
SPS 3000 ADV T B1
UPS
Description
Salicru's SPS ADVANCE T series offers, as a UPS solution, optimum levels of efficiency and reliability for all critical devices that require power supply continuity and dependability. They come in a very compact tower format to save space in server and computer rooms. They also feature line-interactive technology to combat any fluctuations in the mains supply together with an output voltage that is always sine-wave, the highest quality possible to power all sensitive loads.
For easier and more convenient use, they feature a display that shows all necessary information on the operation of the device and power supply (input/output voltage, % load, % battery, etc.) and a wide range of communication options through the USB interface with HID protocol, monitoring and management software (downloadable) and integrated smart slot (SNMP).
Also noteworthy is their compatibility with current APFC (active power factor correction) power supplies.
The power range for the SPS ADVANCE T series is: 850, 1,000, 1,500, 2,000 and 3,000 VA.
Technical Specifications
TECHNOLOGY - Line-interactive
FORMAT - Tower
INPUT
Rated voltage - 230 V
Voltage range 100% load - 165 ÷ 290 V
Stabiliser - AVR (Buck & Boost)
Rated frequency - 50 / 60 Hz (auto-detection)
Frequency range - ±5 Hz
Auto~detection of frequency - Yes
Protection - Resettable breaker
OUTPUT
Rated voltage - 230 V
Voltage accuracy (battery mode) - ±10%
Power (VA/W) - 3000 / 2100
Total harmonic distortion (THDv) - <5%
Waveform (battery mode) - Pure sine wave
Frequency - 50/60 Hz (same as input)
Frequency accuracy (battery mode) - ±1 Hz
Compatibility with APFC loads - Yes (1)
Performance Stabiliser mode (AVR) - >92%
Performance Battery mode - >80%
Admissible overloads in battery mode - 110% for 1 min / >130% immediate
Socket type - IEC C13
No. Of sockets - 4
BATTERY
Battery type - Pb-Ca sealed, AGM, maintenance-free
Charge type - I/U (constant current/constant voltage)
Recharge time - 4 hours to 90%
Battery test - Automatic on each start-up + manual
COMMUNICATION
Ports - RS-232 / USB (HID)
Intelligent slot - Slot for SNMP/potential-free contacts/ MODBUS
Monitoring software - For Windows, Linux and Mac
INDICATIONS
Type - LCD + keypad
Values - Input and output voltage / % load / % battery / backup
Levels - Connected load / overload / battery / low battery
Operating modes - Normal / Stabilisation (AVR) / Battery / Fault
Alarm - Battery / low battery / overload / failure
Audible - Every 30 s for battery operation. Every 2 s for low battery / Polarity. Every 0,5 s for overcharge. Continuous for fault.
Failure - Display LCD
OTHER FUNCTIONS
Cold start (start-up from batteries) - Yes
Emergency stop (EPO) - Yes
GENERAL
Operating temperature - 0º C ÷ 40º C
Relative humidity - Up to 95%, non-condensing
Maxium operating altitude - 2,400 masl
Acoustic noise at 1 metre - <45 dB (2)
STANDARDS
Safety - EN-IEC 62040-1
Electromagnetic compatibility (EMC) - EN 62040-2
Operation - EN 62040-3
Quality and environmental management - ISO 9001 & ISO 14001
DIMENSIONS
Depth (mm) - 416
Width (mm) - 196
Height (mm) - 342
WEIGHT - Weight (kg)
22,16
(1) Power degradation of 20%
(2) <50 dB for 3000 VA model
